REACTION PLATE
ASSEMBLY - LINES
Equipment developed for spring assembly and ultrasound welding. Its main objective is to check airbags. It has a console for parameters introduction.
Workstation 1 (Spring assembly U type):
- U-spring automatic assembly
- Spring force checking and 2 helical springs assembly
- Shield for operator protection
Workstation 2 (Ultrasound Welding):
- Plastic pins detection
- Contour sensor (verification of anomalies in the welding tracks)
- Protection barriers
Workstation 3 (Verifications):
- Continuous verification and OK warning
- Measurement of contacts opening
- Welding and components verification by camera view
GLOVE COMPARTMENT AXLE
ASSEMBLY – WORKSTATION
Equipment conceived for assembly and final checking of the right and left glove compartment axis.
- Automatic assembly of the metallic axes
- LED’s panel for error identification transmitted by view camera
- Verification of components through cameras
- Bimanual control for operator’s protection
- Manual assembly for shock absorber and stoppers
IRUE PANEL
ASSEMBLY - WORKSTATIONS
Equipment designed for assembly and verification of 3 sensors.
- Operator’s intervention in the beginning and end of the operation
- Components are manually inserted in the equipment
- Verification of well assembled sensors through infrared vision cameras
- Verification of the version of the piece
- Ok warning along with hot points according to the version
- LED’s panel for error identification
MOLDING ASM-WS SI
ASSEMBLY - WORKSTATIONS
Equipment specially designed for assembly and component verification.
- It works with an operator and pieces supply is ensured by a robot or two operators will ensure it manually
- 2 linked structures that can be separated when the equipment is being handled by 2 operators
- Safety barriers with an operator
- Bimanual control in case of having 2 operators
- Injection channel cut
- Insertion of metallic clips in the pieces
- Bimanual control regarding operator’s protection
- LED’s frame for error identification
FRONT END PASSAT COUPÉ
ASSEMBLY - WORKSTATION
This equipment has been designed with a specific purpose: put metallic rivets on the plastic front of the VW Passat Coupé car.
- This is operated with pneumatic riveting tool
- Riveting tool operates with movements in XYZ axis regarding metallic rings with flaps to beading
- Metallic clips introduction
- Check the right placement of all elements
- Programming console where further steps can be seen
- Bimanual control regarding operator’s safety
- Eletric and pneumatic movements
ASM-LPLR PANEL
ASSEMBLY - WORKSTATIONS
Equipment designed for metallic rings introduction through nailing.
- Metallic clips introduction
- Metallic bushing nailing
- Torque limit screwdriver
- Verification of all assembled components
- Safety barriers regarding operator’s protection
- Ok mark on the piece
- LED’s panel for error identification
- Operator’s intervention in the beginning and end of the cycle